Royal Winchester Shed 8' x 10'

by Paula
(Branson, MO)

Our Royal Winchester Shed

Our Royal Winchester Shed

We have the Royal Winchester 8’ x 10’ vinyl storage shed. It was purchased from Lowe’s in 2004 for approximately $700. It was very easy to put together. We opted to design and install our own floor rather than purchase the optional one sold with the shed.

The instructions were written clearly and easy to follow. No parts were missing. It took about 6 hours with two people to construct the entire shed. Tools used were our own hammer and wrench.

We currently use the shed for storing miscellaneous items from garden tools to seasonal decorations. It has been wonderful. Spiders do get in through the cracks in the wood plank floor (again our design, not supplied by the manufacturer) but no other critters get in. We have put a lock on the door for security.

Occasionally the building will shift enough that the lock becomes difficult to get through the holes in the shed door handles, but soon it shifts back and everything works well.

The vinyl is very durable and attractive. Even after 5 years it still looks fresh and new. We do wash it down each year with bleach and detergent to keep the dirt and mildew off of it, but otherwise it is very low maintenance.

I would highly recommend this shed to anyone else. In fact we have just added a second unit down the hill from the first for more storage room! The only problem we had in doing this was that it was VERY difficult to find someone who would order it for us. It took us almost a year and delivery of two inferior sheds to finally get the Winchester we had wanted…nothing else would do.



Click Here For More Storage Shed Reviews

Comments for Royal Winchester Shed 8' x 10'

Average Rating starstarstarstarstar

Click here to add your own comments

Jul 25, 2014
re where can I buy
by: Anonymous

Cliford...

These sheds are no longer available. Your best bet is to look on local for sale sites, Craigslist, Kijiji etc.

Jul 19, 2014
Where can I get
by: Anonymous

Where can I get a royal outdoor products Winchester storage building model S010 8ft. by 10 ft.
email address clifordp22@gmail,com

Jul 15, 2014
No new parts available
by: Houptee

The base channel and other parts are no longer available you will have to make your own just use metal angle or metal stud tracks usually found near the sheetrock at Home Depot or Lowes. Or make a framed wood channel out of pressure treated wood 2x4s etc.

Jul 14, 2014
Base Channel
by: Anonymous

>>>
Looking for replacement base channel

Jul 13, 2014
For sale Winchester window
by: Stephen Cohen

I have a window kit never used for sale for Winchester shed 609-876 -4957 no more calls after 7/15/14 6:00 pm

Jul 07, 2014
10x10 Esquire shed
by: Harold

Looking for replacement base channel for my Royal Shed model 101. AL1, AL2, AL5 & AL6. Is there anyone who knows who carries parts for royal sheds now, still searching...

Jul 06, 2014
Want to by a royal shed
by: Anonymous

5704661891 would by an extension kit as well

Jul 02, 2014
Parts Needed for Royal Winchester Shed
by: Anonymous

I looking to purchase the front two panels (left and right) for my Royal Winchester shed. Mine werew damaged in a storm. Please email me at williambickel@comcast.net if you have parts available. Thank you Bill

Jun 19, 2014
Roof Panels Available
by: Anonymous

I have extra Royal Winchester Roof Panels from the two sheds that I originally purchased. If anyone is interested, I have 4 panels altogether, and am willing to sell two for $60.00 + shipping and handling charges. e-mail fltexam@aol.com or 360-43eight-3689 lv msg

Jun 18, 2014
Winchester Manuals
by: Houptee

Winchester-Ver 3-1 Manual

http://www.royalbuildingproducts.com/WorkArea/DownloadAsset.aspx?id=6858

Winchester II v3 4 Manual

http://www.royalbuildingproducts.com/WorkArea/DownloadAsset.aspx?id=6859



Jun 05, 2014
8x10 winchester available
by: Pierre

I have a never assembled winchester with unopened hardware pack and owners manual in english and Spanish. Washingston, NJ 07882
$400. five zero eight 364 6330. thanks hope this helps someone.

May 22, 2014
SOLD! For Sale: Royal Winchester Shed
by: Anonymous

Shed offered for sale in previous post from NJ is no longer available for sale.

May 11, 2014
For Sale: Royal Winchester Shed
by: Anonymous

I have this shed, including the 4 foot extension kit (10' x 12') neatly stacked and ready to sell. I'm in Central/Northern New Jersey if anyone is interested. Looking for $400 or best offer. email mikejdoyle at gmail

May 11, 2014
For Sale: Royal Winchester Shed
by: Anonymous

I have one of these sheds dismantled and neatly stacked, ready to sell to anyone who is interested. I live in the central NJ area. please email mikejdoyle at gmail dot com if interested. $400 or best offer.

May 07, 2014
Royal Winchester Shed
by: Anonymous

I have had my royal winchester shed for about 10 years and its still in fantastic condition. We had a golfball size hail storm here in Illinois and two of my roof panels now have holes. Is there anyway to get two roof panels? Can you even buy the pictured shed anywhere new in Illinois. Has anyone called the company or like a Home Depot? contact choirs14@att.net

May 03, 2014
10 year old shed
by: Jim

I have an 8 x 10 Royal Winchester shed, two windows, two doors. Great condition for ten yeats old. I want to buy a larger shed and will sell this one at $600.00. Buyer must dismantle and ship. Live ion Omaha, NE

Apr 13, 2014
Looking for shed
by: Anonymous

I need one of these sheds new or used I want to extend the one I have. If you have one call me thank you 3053043068 Scott

Apr 06, 2014
Winchester shed parts for sale
by: Anonymous

After having a tree branch fall into the right corner of my shed, I've learned the parts are no longer available. If you are interested in purchasing parts of the shed, contact me at jimmor429@gmail.com. I live in Manassas Virginia, 30miles south of Washington DC.

Apr 06, 2014
Shed parts
by: Anonymous

All,
I see as of today a complete royal Winchester on e b a y. Person is selling it but wants nearly $700. And wants new owner to dismantle. I'm too far away or I would consider it.

If someone would purchase it and sell of the parts they could make some money. I'd in the rested in a few roof panels and front left molding side and lower top panel lip.

Joerappa a o l c o m

Apr 06, 2014
Need roof panel and molding
by: Joe

Hi all,
I've had my royal shed for a good number of years on a concrete base. Never any issues and I love it. Sadly A tree with the help of hurricane Sandy took out my front top left roof panel and side moldings.

Can anyone help? I can flip the roof panel if needed but I'd still need the lower and front moldings.

Any help greatly appreciated.

Joerappa at a o l c o m.

Joe Rappa from New Jersey.


Apr 05, 2014
Royal "The Winchester" Replacement Doors?
by: Anonymous

Has anyone found a set of replacement doors for the 8 x 10 Royal "The Winchester" Vinyl Shed?

My shed is about 10 years old and in great shape but the doors rusted at the bottom from the lawn sprinklers.

Thanks,
Mike - FL

Mar 28, 2014
Royal Winchester
by: Ed

My shed was damaged in the ice storm. I am looking for replacement panels- Toronto, Ontario.
Can be reached at boyd-ek@rogers.com

Mar 21, 2014
Need parts too...
by: Harry

Eric, my shed with the extension got damaged also in the storms...I would love to get whatever parts or pieces you have...I live in Maryland outside of Frederick...Hopefully you are reasonably close...If not maybe we can both get lucky finding the parts on the web ...
Thanks,
Harry

Mar 16, 2014
Royal Winchester
by: Eric Rideout

I have a Royal Winchester shed that got damaged in the Dec. ice storm.
Would like to find parts or someone who needs parts.

Dec 09, 2013
PDF manual
by: Anonymous

Re the PDF manual... works perfectly! I put up 2 sheds using the one from the link a couple of messages back and the jobs could not have been easier! As long as you lay out the metal channels
properly and square to begin with it's hard to go wrong. ;^)

Dec 08, 2013
Has Anyone Tried to Replace The Doors?
by: Dave

I have to replace both doors on my Winchester shed. Since replacement doors are no long available, has anyone tried to make their own doors? The dimensions for each door are 35 1/4" wide by 71 1/2" high by 1 3/4" deep.
Thanks.
Dave

Oct 28, 2013
Parts no longer available
by: Anonymous


I spoke to Barrette on Monday, October 28, 2013 and they told me all the parts they'd had from Royal are now gone.

Oct 21, 2012
manual
by: Anonymous

this looks like a PDF manual hope it helps

http://www.barretteoutdoorliving.com/assets/uploads/pdfs/WinchesterInstall-En.pdf

Oct 17, 2012
Manual request
by: Anonymous

Does anyone have a manual for the Winchester? I had to move my shed and since it has been 10 years since I first put it up I am at a loss.


Sep 22, 2012
Need roof parts
by: W. Harper

In a recent hail storm, I had 10 roof panels (two of which are the clear panels) get damaged ... so would be interested in purchasing replacement parts. I called the company that took over the shed line from Royal Industries and they also told me to flip the panels over, which I'll do if I can't get some replacement parts.

Very disappointed that the manufacturer quit making this shed because I've really enjoyed mine. I bought the 8' extension kit so my shed is 10'x15'.

Jun 20, 2012
Replacing Roof Panels
by: B Perry

I, too, like my 8X10 vinyl shed, and was distressed when hail knocked some holes in several of the roof panels. The company that made the sheds has gone out of business and a similar company no longer has any parts. What I like about the shed is that the roof and walls are thick hollow panels, which is fortunate. Since the holes don't go all the way through, a tech guy at Barrette Outdoor Living (they took over Royal when it folded) said that one solution is to disassemble the roof and flip the panels over. That puts the holes on the inside of the shed, allowing some functional although possibly unattractive patching with duct tape or vinyl tape as needed.

Jun 18, 2012
parts
by: gary

i have a winchester 11 shed love it i need some parts. 877-362-3409 is all out anyone have any ideas?

Dec 21, 2011
Shed is discontinued
by: Anonymous

I found a website when I was looking to buy The Royal Winchester shed. This is the answer they gave me:

The Winchester line unfortunately has been discontinued and is no longer available. The closest shed that comes to that model is the Homestyle Elite shed. It has the same type of design of doors, but the building does look a lot different in design aside from that.

If you want to take a look at that model, here is a link to where its located on our website. http://www.homestylesshed.com/our_sheds/view/elite_series


Sep 05, 2011
replacement doors for winchester shed
by: Judy O'Donnell

We have a Royal Winchester that we have had for over 10 years. The doors have become rotten by the hinges and when we had a recent hurricane in NC. one of the doors came off the hinges. We have noticed in recent years that the doors have moved some which makes it difficult to close the doors. I will call the number for replacement parts that was mentioned. Has anyone else called this number and received replacement parts for their shed?

Aug 18, 2011
Shed parts and warranty
by: Anonymous

Hi all,
Royal is not building sheds any longer (as of about 4 years ago), but you can still get some replacement parts for them by calling 877-362-3409. They also have the manuals available. I read somewhere else that the sheds have a 10-year warranty, so those of you with rotten doors should contact the company about warranty replacement doors. Hope this helps!

May 07, 2011
Bottom of doors rotted
by: Jeff

I bought and assembled the 10 x 10 shed. Yes, it was easy to assemble, but I wondered at the time (2002) why the doors were wooden while the shed itself is vinyl. Well, one door rotted within 4 years and the other just recently. I don't have it below grade. I guess it's just from the snow piled up against it in the winter. What a dissapointment. Just digging and grading the site for the foundation was very time consuming and the cost of the unit is prohibiting me from replacing it soon. I will research the possibility of buying some vinyl replacement doors.

Feb 23, 2011
I Want ONE!
by: Mike

I live in Southern Ca. and want to purchase a Royal, Winchester. Could someone send me a phone # of a supplier?
Mike

THANKS

Mar 18, 2010
Need web address for Royal Sheds
by: G. Mosso

I have 2 Royal Winchester sheds and I love them. They were on temporary wood platforms, but since have taken them down and will be putting them back up on concrete slabs. I cannot find my installation manuals and can't find their website to download new manuals. Can anyone point me in the right direction.

Thanks

Mar 17, 2010
Royal Winchester Shed 8' x 10' parts
by: Gus

Folks I have a Royal Winchester Shed 8' x 10' that was recently damaged by a tree
I need to replace a few pieces on the roof. Where can I find replacement parts?
Gus

Feb 06, 2010
bad door design
by: Joe

I purchased this shed from Lowes 2 yaers ago, the shed went together easy with no problems, i put it on a concrete foundation so i would never have wood rot problems, but to my surprise after two years and after following all manufacturers priming and pinting instructions the WOOD cored doors are rotting away.
So great design on the shed but who's terrible idea was it to put wood core doors on it, if your going to make a maintenance free structure than lets go all the way

Nov 27, 2009
Excellent product
by: Janice Moudy

I bought this shed 4 years ago for a rental house I lived in. It was so easy to put together that I did it all by myself. Many steps but so easy to follow. I was unable to take it with me when I purchased a home so I sold it for $150.00 on Craigslist. I gave it away at that price. Now I am sad to say that I cannot find this exact shed anywhere anymore? Lowes sells ths bigger version for much more money than I originally paid for this shed. It did not ever leak or move on it's foundatin. What a great product, If anyone knows where I can buy please email me at
jmfreebird (at) aol.com.
Thank you.

Aug 02, 2009
Highly Recommend This Shed
by: Arnie Chicago, IL

I purchased my Royal Oak Winchester shed in the Spring of 1997. I too also opted for the wood floor I built. The shed out lasted the floor. I replace the floor this year in June 2009. My mistake was I used constuction grade wood in 1997. This time I used treated wood which should last 20 years. The shed itself is very easy to put together. It is also easy to take apart and put together again. The instructions from the shed are great and easy to follow. I original paid $587 for the shed and approximately $250 for the wood on both floors. The insructions for the floor plan in the manual are perfect. I am not a carpenter but they were also easy to follow. The key is to precut all your wood. I highly recommend this shed.

Click here to add your own comments

Join in and write your own page! It's easy to do. How? Simply click here to return to Royal Storage Shed Reviews.

Custom Search

Keep in touch with our monthly newsletter

Shed Building Monthly

Email

Name

Then

Don't worry -- your e-mail address is totally secure.
I promise to use it only to send you Shed Building Monthly.